Water on the Brain: Troubleshooting Your Company’s Irrigation System Water Pressure
An irrigation system, especially a large one, can come with a fair share of irrigation problems, water pressure being the most common. If you are looking to troubleshoot typical water pressure issues, then look no further than the list below.
1. Check Backflow Device
While it may seem obvious to some, most water pressure issues stem from a valve that is not entirely in the on position. As valves are located above ground and near the exterior of the building, they can be accidentally or purposefully manipulated. The valve handle on the backflow device should be completely parallel with the pipe.
2. Check for Leaks
If the valve on the backflow device is in the fully on position, then check the zone that is ineffectively watering for signs of leaks. Several signs of a leak, aside from low pressure, are water coming up from the soil, divots or depressions, or saturated areas. Once you locate the approximate area of the leak, you can begin digging down to expose the pipe and repair the damage.
3. Check for Choked or Crushed Pipes
If you cannot locate any visible signs of leaking in your irrigation system, then you may have a choked or crushed pipe. A choked or crushed pipe can occur when roots grow around a line, or heavy machinery has compressed the soil. Search for the last fully functional sprinkler head and begin digging along the line because the damage likely occurred between this head and the malfunctioning head.
4. Call for Help
If you are having difficulty locating the damaged area of your system, or if numerous areas around your property are not working correctly, it may be time to call in an expert from the Edgewood, RI, area, as they may be able to resolve the issue a little faster.
A business depends on an irrigation system to maintain an attractive appearance, but low water pressure can be the difference between a green exterior or an arid one. Luckily, the steps above may be able to help restore your irrigation needs.